IN2-WASH-OUT+ is a budget and environment friendly water based surface retardant for a positive application of washed out concrete. It creates an exposure depth of 3 mm. It’s also a curing compound.Read more...
IN2-WASH-OUT+ is a budget and environment friendly water based surface retardant for a positive application of desactivated concrete. It creates an exposure depth of 3 mm.
It's a bulk product that is only advised for big surfaces. The minimum order quantity is 300kg.
IN2-WASH-OUT+ has been developed for bulk applications and works the best on large surfaces. It’s optimized for all weather conditions thanks to the integrated curing compound and for concrete mixtures with Dmax 16 mm.
The active ingredients migrate into the concrete and slow down the cement reaction.
IN2-WASH-OUT+ is a solvent free product.
Place the fresh concrete without leaving marks and spray IN2-WASHOUT+ on the surface with a nebulizer or sprinkler. Allow to hard out for at least 24 hours. Wash out between 12 and 24 hours after application, depending on climatic conditions. Rinse off the product with a high-pressure cleaner.
Consumption: ± 5m²/kg, ensures that the entire surface has been covered well. Using too much product is not harmful, but using more will not accelerate the effect.