Natural stripper for tough stains and curing compounds on concrete floors
IN2-STRIP is a chemical agent, specifically designed to remove tough stains and coatings on concrete floors such as: acrylic curing compounds and coatings, asphalt residue, tape residue, wazes, paint, wazes, tire marks construction chalk, etc. It can also be used to reduce oil and grease stains and permanent marker ink.
Sweep the surface that needs to be stripped. Always try first on a small test area. Apply the product with a sprayer or mop with a rate of 5m2 per liter and use a stiff-bristle broom to distribute it evenly and work it in. Keep the surface wet for 30 minutes and add extra product if necessary.
After 30 minutes, remove the remaining IN2-STRIP with an automatic scrubber or wet/dry vacuum and a detergent with high-pH (such as IN2-CLEAN) to neutralize the treated areas. Clean all surfaces twice and pick up remaining residue with a squeegee or vacuum on a third pass. Finally, rinse the treated surface.