IN2-FINISH is a finishing aid for fresh concrete with hardening and curing properties. Now with improved formula without lithium that vastly reduces the change of efflorescence!Read more...
IN2-FINISH is a finishing aid for fresh concrete with curing and protecting properties. It makes it easier to process the concrete when trowelling.
IN2-FINISH needs to be applied as quickly as possible after pouring the concrete and protects the surface from drying out too fast, without creating a film. The silica in the product reacts with the released chalk when the concrete is hardening, reducing shrinkage cracks and making the concrete dust-free and resistant to dirt and frost. IN2-FINISH replaces the densifyer and traditional curing compound.
HOW TO USE
Shake firmly before use. Apply IN2-FINISH as early as possible with a low pressure sprayer during the first trowelling step. The faster you apply it, the faster the protection will start working.
For an optimal result, apply again when the surface hardens. This also allows you to work more easily. Afterwards, you don’t need to harden the floor. When working with quartz, apply IN2-FINISH after working in the quartz. The product needs to be as close to the surface as possible.
Diluted with clear water 1:1
Shake firmly before use and dilute with clear water with a ratio of 1:1. Apply a layer before flattening the concrete with a pan. Apply a second layer with a low pressure sprayer after flattening the concrete and before trowelling. Apply a third layer during the trowelling.