Fluid epoxy glue for joints and cracks in concrete and stone
Read more...
| Article number: | IN2-FILL-J-001 |
| Quantity: | 10 |
IN2-FILL JOINTS is a liquid epoxy glue for filling up joints in stone and concrete floors. It can also be used to repair cracks up to 5 mm.
IN2-FILL JOINTS can be used on surfaces with low porosity, has an elasticity of 200% and is resistant to all weather conditions.
IN2-FILL JOINTS consists of a resin (component A) and a hardener (component B) that must be mixed in a ratio of 100/25 - 100 parts resin + 25 parts hardener. It can also be combined with polyester pigmented paste or powder to mimic the colour of the surface.
Warning: mix at most 1,25 kg (1kg A + 0,25 kg B) of the product. When mixing larger quantities at once, the chemical reaction can be so strong the mixture hardens out immediately.
PDS IN2-FILL JOINTS (NL)
PDS IN2-FILL JOINTS (ENG)
MSDS IN2-FILL JOINTS NL Component A (Nederland)
MSDS IN2-FILL JOINTS NL Component B (Nederland)
MSDS IN2-FILL JOINTS NL Component A (België)
MSDS IN2-FILL JOINTS NL Component B (België)
MSDS IN2-FILL JOINTS FR Component A (Belgique)
MSDS IN2-FILL JOINTS FR Component B (Belgique)
