IN2-DEFORM LV is a biological release agent for releasing concrete out forms of wood, synthetics or metal. It prevents the attachmentof concrete on moulds and forms a thin, even film that allows concrete to be easily deformed. It can also be used to protect mixers and pumps against concrete residue.
IN2-DEFORM LV is a biological product based on vegetable oil emulsion with low viscosity (very fluid). That allows it to be applied in a very thin layer.
Suited for indoor and outdoor use.
± 25-40 m² / L
HOW TO USE
Apply the product with a brush, sponge or sprayer in an even film. The best results are achieved when spraying at a pressure of around 4-6 bar.
Apply in a thin, even layer over the full surface of the mould or form. Finish non-absorbing surfaces with a wipe.
Don’t apply to much as this can cause discoloration or an uneven surface. Remove all excess release agent before casting.